About this role
UV Operator – Underground Utility Vehicle
Location: City of Joburg region C and D, Gauteng, South Africa Company: Corner Circle Consulting Position Type: Full-Time Closing Date: 4 December 2026
About the role
The UV Operator drives and operates underground utility vehicles, mainly scissor-lift units like the AARD UV-80. The vehicle provides crews with a safe, elevated work platform. They use it to install and maintain services such as ventilation ducting, pipes, cables and support. The operator keeps the machine safe, available and in line with the MHSA and the mine’s TMM rules.
Minimum Requirements
- Grade 10 or higher (Grade 12 is an advantage).
- Valid competency certificate/licence for underground utility vehicles or scissor-lift TMM (MQA-aligned training).
- At least 2 years’ experience operating underground utility vehicles; AARD UV-80 or similar scissor-lift experience preferred.
- Valid Certificate of Fitness for underground work (medical); heat tolerance screening where required by the mine.
- Working-at-heights certificate.
- Valid driver’s licence (Code B/EB or higher) is an advantage.
- Valid mine induction, or willingness to complete it.
- Contactable references from previous mining employers.
Key Responsibilities
-
Discover more
-
Engineer
-
ENGINEERING
-
INTERNSHIP
-
Pre-use checks
-
Do a full pre-use inspection each shift and complete the checklist.
-
Check fluids, tyres, brakes, lights, hooter, steering, hydraulics, guardrails, platform controls and emergency lowering.
-
Check the fire suppression system, fire extinguisher, and collision avoidance/proximity detection system (CAS/PDS).
-
Report defects immediately to the Team Leader or Miner, and do not use an unsafe machine (lock-out and tag-out).
-
Operation
-
Tram the vehicle safely underground, following the mine’s traffic rules, speed limits and right-of-way rules.
-
Position, level and stabilise the vehicle before raising the scissor deck.
-
Raise, lower and operate the platform within its rated load and height limits.
-
Support crews installing vent ducting, columns and pipes, cables, lighting and support (mesh, bolts).
-
Carry tools, materials, and equipment to work areas.
-
Check the hanging wall and sidewalls, ventilation and gas conditions before and during work (as per mine procedure).
-
Make sure everyone on the platform wears fall-protection harnesses and is clipped on where required.
-
Care and records
-
Do basic daily maintenance: greasing, cleaning, topping up and refuelling at approved bays.
-
Book the vehicle in for scheduled services and help artisans with repairs when asked.
-
Keep the machine logbook, hour-meter readings and shift reports up to date.
-
Report all incidents, near misses and damage to the Team Leader or Miner.
-
Follow risk assessments, permits, codes of practice and PPE rules at all times.
-
Skills and attributes
-
Strong safety awareness and discipline.
-
Good spatial awareness and machine control in tight spaces.
-
Mechanically minded; spots faults early.
-
Clear communicator with the Team Leader, Miner and crew.
-
Reliable and punctual; able to work shifts.
-
Working conditions
-
Underground work at Qala Shallows.
-
Shift work, including overtime, weekends and shutdown periods.
-
Hot, dusty, noisy and confined conditions.
-
PPE supplied: hard hat, cap lamp, self-rescuer, safety boots, overalls, gloves, eye and ear protection, fall-protection harness.
-
General note: To apply section removed.
-
Bricklayer – Underground Mining
-
Location: City of Joburg region C and D, Gauteng, South Africa
-
Company: Corner Circle Consulting
-
Position Type: Full-Time
-
Closing Date: 4 December 2026
About the role
The Underground Bricklayer builds and maintains underground brick and block structures. This includes refuge bays, ventilation structures and other mine infrastructure. All work must meet mine standards, engineering drawings and the Mine Health and Safety Act, 1996 (MHSA).
Minimum Requirements
- Grade 10 or higher (Grade 12 is an advantage).
- Trade-tested Bricklayer (QCTO / NQF Level 3) or a recognised bricklaying qualification.
- At least 2 years’ bricklaying experience in an underground mine.
- Proven experience building refuge bays and ventilation structures (stoppings, seals, regulators).
- Valid Certificate of Fitness for underground work (medical); heat tolerance screening where required by the mine.
- Valid mine induction, or willing to complete it.
- Able to read engineering and mine drawings.
- Contactable references from previous mining employers.
Key Responsibilities
-
Refuge bays
-
Build refuge bay walls, bulkheads and seals to the mine’s design and standard.
-
Build door frames and openings, and seal around compressed-air, water and electrical penetrations.
-
Make structures airtight; repair leaks found during inspections or pressure tests.
-
Maintain and repair existing refuge bays to keep them compliant and ready for emergencies.
-
Ventilation structures
-
Build ventilation walls (stoppings), seals, regulators, air crossings and ventilation-door walls.
-
Build sealing walls for old or mined-out areas as instructed by the Ventilation Department.
-
Repair damaged structures and fix air leakage to keep the planned air flow.
-
Work closely with the Ventilation Officer and keep records of structures built and repaired.
-
Other underground construction
-
Build pump chambers, sumps, settler walls, substation and workshop walls, plinths and drains.
-
Build walls for stores, lamp rooms, waiting places and other underground facilities.
-
Do brick and plaster repairs on existing infrastructure.
-
General
-
Read and interpret mine drawings and specifications; set out lines and levels.
-
Mix mortar and concrete to specification; calculate material needs and request stock in time.
-
Check the workplace before starting: support, ventilation, loose rock and gas (as per mine procedure).
-
Complete risk assessments (e.g. Take 5 / mini-HIRA), permits and shift reports.
-
Follow the mine’s codes of practice, standards and lock-out procedures; wear PPE at all times.
-
Take instructions from the Team Leader and/or Miner; guide assistants and general workers on the team.
-
Look after tools and equipment and keep the work area clean.
-
Skills and attributes
-
Neat, accurate and airtight workmanship.
-
Strong safety awareness and discipline underground.
-
Physically fit; able to work in hot, confined, dusty and wet conditions.
-
Reliable and punctual; able to work shifts.
-
Good team player who can lead a small crew.
-
Working conditions
-
Underground work at Qala Shallows.
-
Shift work, including overtime, weekends and shutdown periods.
-
PPE supplied: hard hat, cap lamp, self-rescuer, safety boots, overalls, gloves, eye, ear and dust protection.
-
General note: To apply section removed.
-
General Engineering Superintendent
-
Location: City of Joburg region C and D, Gauteng, South Africa
-
Company: West Wits Mining
-
Position Type: Full-Time
-
Closing Date: 2 December 2026
About the role
To supervise and coordinate engineering activities, ensuring the safe, efficient, and reliable operation of mechanical, electrical, hydraulic, and infrastructure systems. The Engineering Supervisor leads artisans and contractors, manages maintenance activities, and ensures compliance with legal, safety, and operational standards.
Key Responsibilities
-
Safety, Health, Environment & Quality (SHEQ)
-
Ensure compliance with the Mine Health and Safety Act (MHSA), the Occupational Health and Safety Act (OHSA), and company standards.
-
Conduct workplace inspections, risk assessments, and safety audits.
-
Lead incident investigations and implement corrective actions.
-
Ensure all engineering work is performed according to approved procedures and standards.
-
Promote a strong safety culture within the engineering team.
-
Maintenance Management
-
Plan, coordinate, and supervise preventive, predictive, and corrective maintenance activities.
-
Ensure equipment availability and reliability targets are achieved.
-
Monitor breakdown trends and implement reliability improvement initiatives.
-
Manage statutory inspections and maintenance schedules.
-
Maintain proper maintenance records and documentation.
-
Team Leadership
-
Supervise artisans, engineering assistants, and contractors.
-
Allocate daily tasks and monitor work quality.
-
Conduct toolbox talks and shift handovers.
-
Identify training and development requirements.
-
Manage employee performance and discipline where required.
-
Engineering Operations
-
Ensure optimal ope